Standing seam metal roofs look great, last a long time, and stand up to extreme weather, but that is all dependent on the quality of the installation. Today on The Metal Roofing Channel, Thad is joined by Matt Lane and his crew from Metal Construction Solutions and Installations to demonstrate the process from start to finish. The team installs an inch and a half Snaplock panel on Adam Mazzella’s 3,000 square foot roof. Use the links below to watch more detailed tutorial videos about each step.
Topics Covered:
- Shingle Tear-Off 1:15
- Deck Repair 1:58
- Underlayment 3:03
- Curb Measurement 3:54
- Perimeter Flashing 7:37
- Valley 9:24
- First Panels 10:46
- Closures 17:04
- Joining Valleys 19:33
- Valley Panels 21:27
- Chimney 23:43
- Pipe Penetrations 28:59
- Vented Ridge 34:27
Check out Matt Lane’s company, Metal Construction Solutions & Installations, here: http://bit.ly/metal-construction-ohio
Please note the installation details and methods shown in this video are for reference only. Sheffield Metals recommends following their published installation details or for WTW projects following the required details issued and marked approved for that specific project.