Your Metal Roof & Wall Product Supplier in Texas & Southwest U.S.
Welcome to the Sheffield Metals International branch in Texas!
Sheffield Metals International is an industry leader in the distribution of painted, coated, and bare metal products used in the architecturally-driven metal roofing and wall industry. We specialize in providing engineered standing seam metal roof systems and profiles for contractors, manufacturers, architects, and homeowners’ projects.
Sheffield Metals has been in Texas since 2007, and in 2017, our new Southwest U.S. branch opened in Arlington, Texas, which is neatly situated between Dallas and Fort Worth. Our location is built to support you and your business. That’s why we’re able to offer our customers with the complete package — quality products, decades of expertise, and continued support before, during, and after the most complicated projects.
Metal Sheet & Coil, Rollforming Machinery, Engineered Profiles, Accessories, & More — Available for Pick Up or Delivery in Texas & Southwest U.S.!
Painted & Bare Metal Sheet & Coil – Galvalume & Aluminum
For over 20 years, Sheffield Metals has been supplying the architectural metals industry with painted and bare metal sheet and coil products to fabricate metal roof and wall panels, flashings, and trim. In addition to the traditional Galvalume® roofing products that have experienced steady growth in the Southwest, Sheffield Metals is also bringing its .032 aluminum program to the Arlington branch to better suit projects on the coastline.
The Sheffield Metals Arlington location continuously stocks more than 35 colors and can order virtually any custom color to accommodate your project. Our painted Galvalume and aluminum sheet and coil are coated in Fluropon®, a high-quality and long-lasting PVDF resin paint system (Kynar 500® or Hylar 5000®) produced by our partners at Sherwin-Williams. We also offer zinc (elZinc®) and copper sheet and coil products by request.
All orders for customers in the Southwest are cut-to-length in our Arlington facility, which has full coil and sheet processing capabilities. Metal is available in 40”, 44”, and 48” widths to minimize scrap and drop-cuts.
Engineered Metal Roof & Wall Systems
We offer a complete selection of engineered standing seam metal roof and wall systems and related accessories to use for all of your projects, including residential, commercial, solid substrate, and open framing applications. Our engineered systems have been tested to meet the strict industry standards set forth by the industry, including wind uplift, water penetration, water submersion, hail rating, fire rating, TDI approval, and more. All SMI panel profiles meet minimum UL-90 approvals.
Portable Rollforming Machinery & Equipment
Providing an array of profile offerings, including engineered profiles, is one of the most efficient ways to garner more business and better serve diverse customers. That’s why the popularity of portable rollforming specifically in Texas has exploded in recent years. Let Sheffield Metals’ line-up of forming machinery and equipment create the right solution to help you meet your goals and complete projects:
- New Tech Machinery rollforming equipment
- Machinery training and support
- Access to multiple brands of brakes and shears
Accessories & Components for Metal Roof & Wall Systems
Incorporate our complete line of accessories into your architectural and engineered metal roofing systems! This location stocks underlayment, sealant, butyl tape, pipe boots, clips, clamps, screws, rivets, and coated fasteners to match our color finishes. We also offer accessories to use with zinc and copper products.
3-Day Lead Times to the Texas, Louisiana, Oklahoma, and New Mexico Regions
Whether you walk-in to our facility or need order delivery, Sheffield Metals Arlington location proudly provides the metal roofing products and services to the following states, cities, and surrounding areas:
- Texas – Including Houston, San Antonio, Dallas, Fort Worth, Arlington, Austin, & El Paso
- Louisiana – Including New Orleans, Baton Rouge, Shreveport, Lafayette, & Lake Charles
- Oklahoma – Including Oklahoma City, Tulsa, Norman, Broken Arrow, & Lawton
- New Mexico – Including Albuquerque, Las Cruces, Rio Rancho, Santa Fe, & Roswell
Best of all: You can expect your order to be fulfilled within THREE (3) DAYS of order placement.*
If you or your business is not located in any of the states listed above, please reach out to us! We can connect you with the Sheffield Metals location that is closest and most convenient for you.
*Dependent on standard color and project size.
Providing Aluminum Metal Sheet & Coil Products to the Texas Gulf Coast
When it comes to homes and properties located directly on the Texas Gulf Coast, aluminum is becoming the roofing material of choice. Aluminum has inherent properties that resist against corrosion from saltwater, and performs significantly better on the coast than Galvalume (steel).
In the past, the availability of aluminum for metal roofing and wall projects was scarce in the west, as most aluminum products were produced, painted, and stored on the East Coast. However, we’ve committed to boosting our aluminum program at the Arlington facility to bring the products you need to complete aluminum standing seam metal roof projects in the Southwest U.S. The SMI Texas branch stocks painted aluminum metal sheet and coil, which means it can be processed on-site and picked up or delivered in a much shorten time frame to better accommodate your manufacturing or installation schedule.
Ask us about our aluminum program and how we can partner with you to create a solution that helps to grow your business!
Exclusive Access to Experts in Sheffield Metals’ Architectural and Technical Departments
Sheffield Metals understands the importance of having technical and architectural resources available to answer your questions and assist with your specific project requirements. With more than 50 years of combined installation, technical, and architectural experience, Sheffield Metals has put together the best Technical and Architectural Departments the industry has to offer. Our representatives in both departments have backgrounds in installing, bidding, design, and working with technically-driven architectural projects.
- Architectural submittals & details
- Proper panel profile selection
- Design & bidding assistance services
- Engineering requirements
- Estimating services
- Rollforming machine training & support
- Any technical or installation questions
Some buildings in Texas and the Southwest U.S. might need to adhere to specific technical requirements and building codes, such as TDI (Texas Department of Justice) approvals, so please don’t hesitate to contact us should you have any questions or need assistance.
Protect Your Roof & Wall Projects with Weathertight Warranties
It’s no secret: The weather can be unpredictable and harsh in Texas and its surrounding states.
One of the best ways to protect your investment or your customers’ investment is to have the option to purchase or specify a weathertight warranty on the new metal roof or wall system. These warranties promise that not only will the roof system not leak due to material defects, but that the roof or wall was installed according to the manufacturer’s tested and proven standards/details, which means it’ll live up to strict industry standards.
The SMI Technical Department controls all of our weathertight warranties in house and is dedicated to approving, inspecting, and issuing weathertight warranties on your commercial, architectural, and structural projects. Sheffield Metals offers two distinct types of weathertight warranties:
- Limited Weathertight Warranties — Covers repairs up to the dollar amount paid for the cost of the metal roof materials and installation. This is not limited or capped by a single issue if multiple events occur in the duration of the warranty. Year lengths available: 5-year, 10-year, 15-year, 20-year, 25-year, 30-year, and 35-year options.
- No Dollar Limit Weathertight Warranties — If repairs for an affected roof or wall exceed that of the cost of the materials and installation, then the total cost of repairs will be covered. This is not limited or capped by a single issue should multiple events occur in the duration of the warranty. Year lengths available: 10-year, 15-year, 20-year, 25-year, 30-year, and 35-year options.