How to Install Metal Roofing Details: Bullnose Rake Detail

We use our scale model roof deck to demonstrate tips and tricks on how to install the Sheffield Metals bullnose rake detail.

Steps covered:
1. Create and set guide jigs
2. Fasten cleat every 8 inches
3. Seal all joints
4. Fasten bullnose rake every 4 inches

Install fasteners straight and perpendicular to the roof surface. Ensure all swarf is cleaned off during and after installation. Clean off remnant chalk lines.

Note that all clips are installed 2 feet on center.

Don’t forget to subscribe to The Metal Roofing Channel so you don’t miss out on future videos!

Please note the installation details and methods shown in this video are for reference only. Sheffield Metals recommends following their published installation details or for WTW projects following the required details issued and marked approved for that specific project.