Skip to content
Sheffield Metals Metal Coils in Stock

Metal Coils & Sheets for Standing Seam Roofing Systems

Need reliable, premium-quality coils and sheets for your next metal roofing project? Sheffield Metals offers cold-rolled, painted metal coils and sheets made from Galvalume® and aluminum, at varying thicknesses including 26, 24, and 22-gauge. Choose from over 50 Sherwin-Williams Flouropon® PVDF paint coatings.

We have slitting and cut-to-length services in standard finished coil widths of 16, 20, 22, and 24 inches (depending on color), plus 4’x10′ flat sheets. Custom orders outside of our standard slit widths are available but may incur dropcut fees.

Coils & Sheet Products

Standing seam job coming up? Get exactly how much material you need, when you need it, complete with industry-leading paint and substrate warranties.

  • Sheffield Metals coils in blue branded packaging at a service center

    GALVALUME

    • 22-gauge, 24-gauge, 26-gauge
    • 40, 44, 48-inch masters depending on color
    • PVDF and SMP options
    • Slit to width and cut to length
    • Sheets
    Superior Uplifts 50-Year Warranty 50+ Colors Available
  • Sheffield Metals aluminum coils with branded blue wraps

    ALUMINUM

    • .032, .040, .050, .063
    • 40-inch master coils for .032
    • 48-inch master coils for all thicknesses
    • Slit to width and cut to length
    • Sheets
    Lightweight Sustainable Coastal-Ready
  • Painted metal coils in gray, black, blue, and white stacked on wooden pallets in a warehouse

    Coasteel® (ZAM® 90)

    • 24-gauge
    • 40 or 48-inch master coils
    • Slit to width and cut to length
    • Sheets
    Coastal-Ready High Strength Cost-Effective
    Learn more

24-Gauge Stock Availability Matrix

To explore the full spectrum of our coil and sheet colors, visit our color options page.

Color LEED V5 ISR EMI 3-Year SRI SRI 22 GA.
48.375″
24 GA.
40.375″
24 GA.
44.375″
24 GA.
48.375″
.032 NOM.
40.500″
.032 NOM.
48.000″
.040 NOM.
48.000″
.050 NOM.
48.000″
.063 NOM
48.000″
Acrylic Coated Galvalume L 0.67 0.14 N/A 56 • • •
Ash Gray 0.32 0.83 31 31 • • • • •
Burgundy 0.31 0.86 29 32 • •
Burnished Slate 0.25 0.83 22 22 • •
Champagne Metallic 0.32 0.83 31 31 • •
Charcoal Gray 0.25 0.83 22 22 • • • • • • •
Colonial Red 0.25 0.83 22 22 • • • •
Copper Metallic L 0.35 0.75 32 32 • • • •
Cor-Ten AZP® Raw 0.32 0.89 N/A 34 • •
Dark Bronze 0.25 0.83 22 22 • • • • • • • • •
Dove Gray L 0.35 0.83 35 35 • • • • • •
Evergreen 0.25 0.83 22 22 • • • • •
Hartford Green 0.25 0.83 22 22 • • • • •
Hemlock Green 0.25 0.83 22 22 • •
Mansard Brown 0.25 0.83 22 22 • • • • • • •
Matte Black 0.25 0.83 22 22 • • • • • • • • •
Medium Bronze 0.25 0.83 22 22 • • • • • • • • •
Patina Green 0.32 0.83 31 31 • •
Pre-Weathered Galvalume® 0.24 0.83 19 21 • • • •
Regal Blue 0.25 0.83 22 22 • •
Regal Red L 0.35 0.83 35 35 • •
Regal White L 0.65 0.83 77 77 • • • • • • • • •
Sandstone L 0.35 0.83 35 35 • • • • •
Sierra Tan 0.31 0.87 28 31 • • • • •
Silver Metallic L 0.54 0.77 55 60 • • • • • •
Slate Blue 0.25 0.83 22 22 • • •
Slate Gray L 0.35 0.83 35 35 • • • • • • • •
Solar White L 0.65 0.83 77 77 • • • • • • •
Stone White L 0.55 0.83 59 63 • • • • •
Surrey Beige L 0.35 0.75 32 32 • • • •
Terra Cotta L 0.35 0.83 35 35 • • • • •
TLG Black 0.25 0.83 22 22 • •
TLG Charcoal Gray 0.25 0.83 22 22 • •
TLG Dark Bronze 0.25 0.83 22 22 • •
TLG Medium Bronze 0.25 0.83 22 22 • •
TLG Moonstone® 0.32 0.83 31 31 • •
Vintage® 0.30 0.70 N/A 22 • •
Custom Colors ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Notes

  • All of Sheffield’s CoolR® metal is painted with a .20 mil primer and .70 – .90 mil Top Coat of 70% PVDF resin-based coating. The reverse side has a .20 primer and .30 – .40 backer coating.
  • Cor-Ten AZP Raw®, metallic, and textured products are directional.
  • For low slope roofing to meet LEED V5 requirements, the initial SRI must be ≥ 82 OR the 3-year SRI must be ≥ 64. For steep slope roofing to meet LEED V5 requirements, the initial SRI for 75% of the roof must be ≥ 39 OR the 3-year SRI must be ≥ 32.
  • Low slope is defined as ≤ 2:12. Steep slope is defined as > 2:12.
  • Materials should be stored in a cool, dry place. Materials with PVC film on project sites should be used immediately or stored in a climate-controlled setting. PVC film must be removed prior to installation.
  • Anything not noted in the Availability Matrix can be painted, regardless of width, substrate, or thickness; however, it would be subject to a minimum paint run and would need to meet standard custom order criteria.

Key

● = Stocked Item
● = Available from Atlanta location only
▲ = Available on Custom Order Basis
L = LEED V5 Eligible
ISR = Initial Solar Reflectance
EMI = Emissivity
SRI = Solar Reflectance Index

Colors shown are matched as accurately as possible, but may vary slightly from the finished product. These rich and vibrant colors are produced with PVDF resins, which provide superior color retention and allow Sheffield Metals to offer non-prorated coating warranties for most applications. Touch-up should only be done with a Sheffield Metals color-matched PVDF air-dry paint pen. Galvalume® is a registered trademark of BIEC International Inc. Coating warranty varies for CoolR® Moonstone, Matte Black, Copper, Champagne, Silver, and Pre-Weathered Galvalume. Please contact your representative for more information. Steelscape’s Vintage carries a 20-year Finish Warranty. Vintage is a dynamic finish that changes with the light where batch-to-batch and directional variations can occur. For more information, please visit steelscape.com/vintage.

26-Gauge Stock Availability Matrix

To explore the full spectrum of our coil and sheet colors, visit our color options page.

Color LEED V5 ISR EMI 3-Year SRI SRI 27.5″ 40.375″ 48.375″
Acrylic-Coated Galvalume™L0.670.145556•••
Crinkle Coat Black0.290.852627••
Crinkle Coat Burnished Slate0.290.892930••
Crinkle Coat Charcoal GrayL0.320.873333••
Crinkle Coat Evergreen0.300.883031••
Crinkle Coat Regal WhiteL0.680.90N/A83••
L/S Antique0.280.852727••
L/S Ash GrayL0.490.87N/A56•••
L/S Black0.280.852727••
L/S Charcoal Gray0.300.87N/A31••
L/S Colonial Red0.290.852728•••
L/S Dark Bronze0.260.852524••
L/S Dark GrayL0.320.863333•••
L/S Dove GrayL0.490.87N/A56•••
L/S Evergreen0.260.872625••
L/S Mansard Brown0.270.87N/A27••
L/S Medium BronzeL0.300.863230•••
L/S Regal WhiteL0.660.876680•••
L/S SandstoneL0.600.87N/A71•••
L/S Sierra Tan0.290.863029•••
L/S Slate GrayL0.400.854043•••
L/S Terra CottaL0.370.883640•••

Notes

  • All of Sheffield’s CoolR® metal is painted with a .20 mil primer and .70 – .90 mil Top Coat of 70% PVDF resin-based coating. The reverse side has a .20 primer and .30 – .40 backer coating.
  • Crinkle coat and textured products are directional.
  • For low slope roofing to meet LEED V5 requirements, the initial SRI must be ≥ 82 OR the 3-year SRI must be ≥ 64. For steep slope roofing to meet LEED V5 requirements, the initial SRI for 75% of the roof must be ≥ 39 OR the 3-year SRI must be ≥ 32.
  • Low slope is defined as ≤ 2:12. Steep slope is defined as > 2:12.
  • Materials should be stored in a cool, dry place. Materials with PVC film on project sites should be used immediately or stored in a climate-controlled setting. PVC film must be removed prior to installation.
  • Anything not noted in the Availability Matrix can be painted, regardless of width, substrate, or thickness; however, it would be subject to a minimum paint run and would need to meet standard custom order criteria.
  • For items not stocked in 27.5″, customers may be subject to purchasing a 20″ drop coil.

Key

● = Stocked Item
L = LEED V5 Eligible
ISR = Initial Solar Reflectance
EMI = Emissivity
SRI = Solar Reflectance Index

Colors shown are matched as accurately as possible, but may vary slightly from the finished product. These rich and vibrant colors are produced with PVDF resins, which provide superior color retention and allow Sheffield Metals to offer non-prorated coating warranties for most applications. Touch-up should only be done with a Sheffield Metals color-matched PVDF air-dry paint pen. Galvalume® is a registered trademark of BIEC International Inc. Coating warranty varies for Pre-Weathered Galvalume. Please contact your representative for more information.

Get the material you need for your next standing seam metal roofing or wall project.

  1. Step One

    Reach out to us

    Submit a contact form or call your local Sheffield Metals branch.

  2. Step Two

    Talk with a specialist

    Discuss your business needs, project details, and design choices.

  3. Step Three

    Get set up for success

    Your metal roofing and wall materials are delivered to your door.

Painted metal coils in red, green, blue, and burgundy stacked on pallets in a warehouse

COOLR® Metal Roofing

COOLR® is a leading family of sustainable, energy-efficient roofing products, meticulously designed for optimal performance across both low- and steep-slope applications. All of our 24-gauge PVDF colors are part of the COOLR brand, offering architects, contractors, and property owners an extensive selection of over 50 stocked options. Each is finished with Sherwin Williams’s high-performance Fluropon® PVDF coating, a premium choice engineered to meet LEED V5 eligibility and comply with stringent ASTM performance standards.

Beyond our comprehensive stocked palette, COOLR offers the flexibility of custom color matching, ensuring seamless integration with any architectural vision. Our products are available in a wide range of gauges, widths, and substrates, providing versatile solutions for diverse project needs. We require virtually no minimum length for our standard colors, and most coils and sheets are processed only after an order is placed. This allows us to precisely custom slit, cut, and package your metal to your exact project specifications, guaranteeing both flexibility and efficiency without compromising on superior quality.

“Green Knight® Metal Roofing has worked with Sheffield Metals for many years. Our assessment is that Sheffield is not only a supplier, they are a partner, integral to the success of our company. I do not believe you could find a better partner for your business anywhere.”

Joel Kenty

Green Knight Metal Roofing

Frequently Asked Questions About Our Products

How Do I Order?

Feel free to click the “Get a Quote” Button below to get in touch with a member of the Sheffield Metals Sales team.

Does Sheffield Metals Sell Metal Roofing Panels?

No, Sheffield Metals does not sell panels. This keeps us uniquely suited to offer unbiased help to contractors and regional manufacturers without competition getting in the way.

What Are Your Lead Times?

We pride ourselves on efficiency—most of our products ship within three days from one of our seven strategically located locations across the United States.

Do You Have Minimum Quantities or Sizes on Orders?

Sheffield Metals offers virtually no minimums, depending on location. We offer slitting and cut-to-length services in standard finished coil widths of 16, 20, 22, and 24 inches (depending on color), plus 4’x10′ flat sheets. Custom sizes are available but may incur dropcut fees.

Can You Fulfill Custom Color Requests?

Custom color requests can be fulfilled as a premium. Learn more about our custom color program.

What’s the Difference Between Coils and Sheets?

Sheffield Metals offers both painted and nonpainted metal coils and sheets. Coils are typically used with a rollformer to fabricate panels for installation, while flat sheets are primarily used for trim.

So, what are you waiting for?

Reliable materials and quick turnaround times can make all the difference in keeping projects on track and helping your business grow. Partner with Sheffield Metals today and get the metal you need, when you need it.

Get a quote